Truth® 14.12.00 Egress Casement Hinge kit, 13" Track w/ Snap Ring, Pairs, Stainless Steel
- Regular price
- $35.00
- Regular price
-
- Sale price
- $35.00
- Unit price
- per
Vendor : Amesbury Truth Hardware
Product Type : Hardware
Sku :
Truth® 14.12. Series Egress 2-Bar concealed casement hinge assembly, 13 inch stainless steel track with Stainless Steel hinge arms.
This kit is comprised of four (4) Amesbury Truth® components to make a pair of upper and lower hinge assemblies for casement windows. Hinge and track assemblies 14.12.00.505 and 14.12.00. 506
Screws are not included, type of screws required are determined by application and profile material.
This kit will fit left or right hand casement windows.
Application: Hinges mounted on left or right side of casement windows
Series: Egress, Hinge arm snaps onto track stud
Track Length: 13 inches
Track Width: 7/16 inch
Track Material: Stainless Steel with Brass Stud
Hinge Opening: 2-3/16 inch 2.179 actual - (See additional images)
Arm Lengths: Long arm is 10 inches, shorter arm is 5-7/16 inches 5.452 actual
Arm Material: Stainless Steel
Stack Height: 7/16 inch
Handed: Yes, Right Hand and Left hand Pair
Sold in Pairs: 1 Upper, 1 Lower Hinge Assembly
Screws are NOT included, recommended size are #7 x 3/4 inch, stainless steel, Phillips Flat Head, Sheet Metal Screw. Actual screw will be determined by application and window material.
Markings on Hinges: Truth® 32062, 31861
Additional Information:
Truth® 14.12 Maxim Concealed Casement Window Hinge is NOT for use on awning windows. Used specifically with the Maxim Dual Arm Operator, in order to achieve egress access in required situations. Hinge arms are made of heavy gauge steel to give sash weight carrying capability of up to 69 pounds
EGRESS INFO:
International Building Code advises that every bedroom must contain at least one egress window.
Basically, The operable portion of the window must be at least 24-inches high and at least 20-inches wide, with a net area at least 5.7 square feet, with an opening no higher than 44 inches from the floor. Check local codes for more information.
Amesbury Truth® ‘egress’ hardware essentially stays tucked in close to the jamb, with minimal ‘pivoting’ towards the center of the unit—thereby creating a greater net-opening width.
Egress hinge provides Approximately 2-5/8 inch wider opening to meet some code requirements on Emergency Exit.
This kit is comprised of four (4) Amesbury Truth® components to make a pair of upper and lower hinge assemblies for casement windows. Hinge and track assemblies 14.12.00.505 and 14.12.00. 506
Screws are not included, type of screws required are determined by application and profile material.
This kit will fit left or right hand casement windows.
Application: Hinges mounted on left or right side of casement windows
Series: Egress, Hinge arm snaps onto track stud
Track Length: 13 inches
Track Width: 7/16 inch
Track Material: Stainless Steel with Brass Stud
Hinge Opening: 2-3/16 inch 2.179 actual - (See additional images)
Arm Lengths: Long arm is 10 inches, shorter arm is 5-7/16 inches 5.452 actual
Arm Material: Stainless Steel
Stack Height: 7/16 inch
Handed: Yes, Right Hand and Left hand Pair
Sold in Pairs: 1 Upper, 1 Lower Hinge Assembly
Screws are NOT included, recommended size are #7 x 3/4 inch, stainless steel, Phillips Flat Head, Sheet Metal Screw. Actual screw will be determined by application and window material.
Markings on Hinges: Truth® 32062, 31861
Additional Information:
Truth® 14.12 Maxim Concealed Casement Window Hinge is NOT for use on awning windows. Used specifically with the Maxim Dual Arm Operator, in order to achieve egress access in required situations. Hinge arms are made of heavy gauge steel to give sash weight carrying capability of up to 69 pounds
EGRESS INFO:
International Building Code advises that every bedroom must contain at least one egress window.
Basically, The operable portion of the window must be at least 24-inches high and at least 20-inches wide, with a net area at least 5.7 square feet, with an opening no higher than 44 inches from the floor. Check local codes for more information.
Amesbury Truth® ‘egress’ hardware essentially stays tucked in close to the jamb, with minimal ‘pivoting’ towards the center of the unit—thereby creating a greater net-opening width.
Egress hinge provides Approximately 2-5/8 inch wider opening to meet some code requirements on Emergency Exit.
Hurry! Only
0
units left in stock!
Couldn't load pickup availability
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Truth® 14.12. Series Egress 2-Bar concealed casement hinge assembly, 13 inch stainless steel track with Stainless Steel hinge arms.
This kit is comprised of four (4) Amesbury Truth® components to make a pair of upper and lower hinge assemblies for casement windows. Hinge and track assemblies 14.12.00.505 and 14.12.00. 506
Screws are not included, type of screws required are determined by application and profile material.
This kit will fit left or right hand casement windows.
Application: Hinges mounted on left or right side of casement windows
Series: Egress, Hinge arm snaps onto track stud
Track Length: 13 inches
Track Width: 7/16 inch
Track Material: Stainless Steel with Brass Stud
Hinge Opening: 2-3/16 inch 2.179 actual - (See additional images)
Arm Lengths: Long arm is 10 inches, shorter arm is 5-7/16 inches 5.452 actual
Arm Material: Stainless Steel
Stack Height: 7/16 inch
Handed: Yes, Right Hand and Left hand Pair
Sold in Pairs: 1 Upper, 1 Lower Hinge Assembly
Screws are NOT included, recommended size are #7 x 3/4 inch, stainless steel, Phillips Flat Head, Sheet Metal Screw. Actual screw will be determined by application and window material.
Markings on Hinges: Truth® 32062, 31861
Additional Information:
Truth® 14.12 Maxim Concealed Casement Window Hinge is NOT for use on awning windows. Used specifically with the Maxim Dual Arm Operator, in order to achieve egress access in required situations. Hinge arms are made of heavy gauge steel to give sash weight carrying capability of up to 69 pounds
EGRESS INFO:
International Building Code advises that every bedroom must contain at least one egress window.
Basically, The operable portion of the window must be at least 24-inches high and at least 20-inches wide, with a net area at least 5.7 square feet, with an opening no higher than 44 inches from the floor. Check local codes for more information.
Amesbury Truth® ‘egress’ hardware essentially stays tucked in close to the jamb, with minimal ‘pivoting’ towards the center of the unit—thereby creating a greater net-opening width.
Egress hinge provides Approximately 2-5/8 inch wider opening to meet some code requirements on Emergency Exit.
This kit is comprised of four (4) Amesbury Truth® components to make a pair of upper and lower hinge assemblies for casement windows. Hinge and track assemblies 14.12.00.505 and 14.12.00. 506
Screws are not included, type of screws required are determined by application and profile material.
This kit will fit left or right hand casement windows.
Application: Hinges mounted on left or right side of casement windows
Series: Egress, Hinge arm snaps onto track stud
Track Length: 13 inches
Track Width: 7/16 inch
Track Material: Stainless Steel with Brass Stud
Hinge Opening: 2-3/16 inch 2.179 actual - (See additional images)
Arm Lengths: Long arm is 10 inches, shorter arm is 5-7/16 inches 5.452 actual
Arm Material: Stainless Steel
Stack Height: 7/16 inch
Handed: Yes, Right Hand and Left hand Pair
Sold in Pairs: 1 Upper, 1 Lower Hinge Assembly
Screws are NOT included, recommended size are #7 x 3/4 inch, stainless steel, Phillips Flat Head, Sheet Metal Screw. Actual screw will be determined by application and window material.
Markings on Hinges: Truth® 32062, 31861
Additional Information:
Truth® 14.12 Maxim Concealed Casement Window Hinge is NOT for use on awning windows. Used specifically with the Maxim Dual Arm Operator, in order to achieve egress access in required situations. Hinge arms are made of heavy gauge steel to give sash weight carrying capability of up to 69 pounds
EGRESS INFO:
International Building Code advises that every bedroom must contain at least one egress window.
Basically, The operable portion of the window must be at least 24-inches high and at least 20-inches wide, with a net area at least 5.7 square feet, with an opening no higher than 44 inches from the floor. Check local codes for more information.
Amesbury Truth® ‘egress’ hardware essentially stays tucked in close to the jamb, with minimal ‘pivoting’ towards the center of the unit—thereby creating a greater net-opening width.
Egress hinge provides Approximately 2-5/8 inch wider opening to meet some code requirements on Emergency Exit.
Shipping
TruthParts.com does our best to ensure that your products arrive quickly and safely. The available shipping rates and methods available to you will display on the checkout page and can vary depending on the product(s) you need to order.
We reserve the right to contact you about your order if it is unable to be shipped
Applicable local/state taxes apply where necessary.
All orders are processed within 1-2 business days.
We do our best to keep all products in stock. In the event that we mistakenly do not have the product you ordered, we will either contact you with an option for a replacement part or cancel/refund your order.
We are not responsible for delays in shipping due to an incorrect address, weather, a pandemic, unforeseeable events, etc. and/or once the package is in the hands of the delivery service.
Returns & Cancellations
We do not accept returns except in the event that we have sent you the wrong part. We do this to keep our prices low. Please make sure you are purchasing the correct part. If you are not sure, please contact us to double-check.
If you think you’ve ordered the wrong part, please send us a message on our contact-us page right away that includes your order number. We ship most orders within 12 hours of placement of the order and cannot guarantee that we can cancel every order.
California Proposition 65
Please note that some of our products may contain chemicals known by the state of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.p65warnings.ca.gov.
TruthParts.com does our best to ensure that your products arrive quickly and safely. The available shipping rates and methods available to you will display on the checkout page and can vary depending on the product(s) you need to order.
We reserve the right to contact you about your order if it is unable to be shipped
Applicable local/state taxes apply where necessary.
All orders are processed within 1-2 business days.
We do our best to keep all products in stock. In the event that we mistakenly do not have the product you ordered, we will either contact you with an option for a replacement part or cancel/refund your order.
We are not responsible for delays in shipping due to an incorrect address, weather, a pandemic, unforeseeable events, etc. and/or once the package is in the hands of the delivery service.
Returns & Cancellations
We do not accept returns except in the event that we have sent you the wrong part. We do this to keep our prices low. Please make sure you are purchasing the correct part. If you are not sure, please contact us to double-check.
If you think you’ve ordered the wrong part, please send us a message on our contact-us page right away that includes your order number. We ship most orders within 12 hours of placement of the order and cannot guarantee that we can cancel every order.
California Proposition 65
Please note that some of our products may contain chemicals known by the state of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.p65warnings.ca.gov.